IT-Tests.com HP HP2-Z12 exam practice questions and answers

If you don't purchase any course, although you spend a lot of time and effort to review of knowledge to prepare for HP certification HP2-Z12 exam, it is still risky for you to pass the exam. But selecting IT-Tests's products allows you to spend a small amount of money and time and safely pass the exam. I believe that IT-Tests.com is more suitable for your choice in the society where time is so valuable. Moreover, our IT-Tests.com a distinct website which can give you a guarantee among many similar sites. Choosing IT-Tests.com is equivalent to choose success.

In order to meet the needs of each candidate, the team of IT experts in IT-Tests.com are using their experience and knowledge to improve the quality of exam training materials constantly. We can guarantee that you can pass the HP HP2-Z12 exam the first time. If you buy the goods of IT-Tests.com, then you always be able to get newer and more accurate test information. The coverage of the products of IT-Tests.com is very broad. It can be provide convenient for a lot of candidates who participate in IT certification exam. Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily.

It's better to hand-lit own light than look up to someone else's glory. IT-Tests.com HP HP2-Z12 exam training materials will be the first step of your achievements. With it, you will be pass the HP HP2-Z12 exam certification which is considered difficult by a lot of people. With this certification, you can light up your heart light in your life. Start your new journey, and have a successful life.

Exam Code: HP2-Z12

Exam Name: HP (Servicing HP Networking Products)

With IT-Tests.com's HP HP2-Z12 exam training materials you can pass the HP HP2-Z12 exam easily. The training tools which designed by our website can help you pass the exam the first time. You only need to download the IT-Tests.com HP HP2-Z12 exam training materials, namely questions and answers, the exam will become very easy. IT-Tests.com guarantee that you will be able to pass the exam. If you are still hesitant, download our sample of material, then you can know the effect. Do not hesitate, add the exam material to your shopping cart quickly. If you miss it you will regret for a lifetime.

HP2-Z12 (Servicing HP Networking Products) Free Demo Download: http://www.it-tests.com/HP2-Z12.html

NO.1 You have been sent to a customer site to check an HP E8212 zlswitch. When you arrive, you notice
that the Fault and Fan Status LEDs are flashing. What is the most likely cause of this LED behavior?
A. The cooling fan is no longer functional
B. The switch is brand new and needs to have the most current firmware installed.
C. The external power supply has failed, causing the fan to malfunction.
D. The switch has failed its self-test
Answer: C

HP pdf   HP2-Z12   HP2-Z12   HP2-Z12 test   HP2-Z12   HP2-Z12

NO.2 You are installing a redundant power supply in an HP E8212 zl switch. Which procedures are
recommended when installing the new power supply?(Select two.)
A. Remove the copper RFI shielding.
B. Attach the new power supply to a different AC power source than the existing power supply to provide
true redundancy.
C. Tighten the retaining screws on the new power supply until they are snug but not over-tight.
D. Connect the redundant power supply to the AC power source before installing it in the switch.
E. Remove the grounding tap from the console port before installing the power supply.
Answer: B,C

HP   HP2-Z12   HP2-Z12   HP2-Z12 exam

NO.3 Which device forwards network traffic based only on Layer 2 information?
A. router
B. switch
C. hub
D. firewall
Answer: C

HP   HP2-Z12   HP2-Z12   HP2-Z12 practice test   HP2-Z12

NO.4 Which HP E Switch Series is specifically designed to be deployed in a data center?
A. E4200vl
B. E6200yl
C. E6600
D. E8200zl
Answer: C

HP exam   HP2-Z12 pdf   HP2-Z12

NO.5 Which switch is specifically designed for networks that require basic connectivity and have little or no IT
support?
A. fixed-port switch
B. light Layer 3 switch
C. modular switch
D. unmanaged switch
Answer: D

HP   HP2-Z12   HP2-Z12   HP2-Z12

NO.6 Which HP A Series switches provide Layer 2 functionality and a Web browser interface but no CLI?
A. HP A5800 Series switches
B. HP NJ2000GIntelliJack switches
C. HP A3600-E1 Series switches
D. HP A3100 Series switches
Answer: B

HP practice test   HP2-Z12   HP2-Z12 certification training   HP2-Z12

NO.7 You are installing an SFP transceiver in an HP A Series switch's SFP port. Which steps should you
perform? (Select two.)
A. Connect the fiber optic cable to the SFP transceiver before installing the transceiver.
B. Slide the transceiver into the SFP port until the spring clips catch.
C. Rotate the clasp, if present on the front of the transceiver, until it catches the knob.
D. Press and hold the spring clips on the SFP port
E. Press and hold the release button below the SFP port.
Answer: B,C

HP   HP2-Z12 demo   HP2-Z12 dumps

NO.8 A faulty configuration on an HP A Series switch locked a customer out of the management interface.
You bypass the configuration and gain access to the switch's CLI.Your manager asks
you to send her the configuration to examine.
What must you do?
A. Establish IP connectivity between the switch and a BackUp the Startup-Config to a TFTP Server server
and issue the backup command
B. Use the copy command to copy the configuration to your management station.
C. Establish IP connectivity between the switch and your management station and use the save
command to save the configuration.
D. Use the saved-configuration command to select the startup-config and save it out to your management
station.
Answer: A

HP   HP2-Z12 certification   HP2-Z12 demo

NO.9 You are installing an HP A Series switch that requires a backup power supply as well as extra power for
Power over Ethernet (PoE) devices. Which device should you connect to this switch?
A. RPS 1200 A
B. RPS 1000 A3
C. RPS 800 A
D. RPS500 A3
Answer: B

HP test   HP2-Z12   HP2-Z12 certification training   HP2-Z12

NO.10 You check the startup-config on an HP A Series switch and find that the switch uses myconfig.cfg as
the main startup-config and has no backup config. What happens if you use the undo startup
savedconfiguration command?
A. The myconfig.cfg file is deleted, and the switch returns to factory default settings at the next reboot.
B. The myconfig.cfg file becomes the backup startup-config, and the switch returns to factory default
settings at the next reboot.
C. The myconfig.cfg file becomes the backup startup-config, and is booted at the next reboot unless you
set another main startup-config
D. The myconfig.cfg file is retained in the switch's memory, but the switch returns to factory default
settings at the next reboot
Answer: D

HP answers real questions   HP2-Z12   HP2-Z12 questions   HP2-Z12   HP2-Z12 exam dumps

NO.11 You log in to an HP A Series switch over a console session in order to establish IP connectivity
between the switch and the rest of the network. What is the minimum user privilege level needed to
complete this task?
A. Operator
B. Monitor
C. System
D. Manage
Answer: C

HP test answers   HP2-Z12 demo   HP2-Z12 test answers   HP2-Z12 exam   HP2-Z12   HP2-Z12

NO.12 DRAG DROP
Match the HP A Series switch user interface with the type of access that it controls.
Answer:

NO.13 Several HP A Series switches are distinguished by a dual-personality (or combo) port. What is an
accurate description of this port?
A. It can accept either Ethernet Base-T cable or fiber optic cable
B. It can accept either Ethernet Base-T cable or a small form-factor pluggable (SFP) transceiver
C. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Both can be used simultaneously.
D. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Only one can be used at a time.
Answer: B

HP practice test   HP2-Z12   HP2-Z12 test   HP2-Z12   HP2-Z12

NO.14 You are troubleshooting an HP A Series switch. You attempt to log in to both the CLI and the Web
browser interface in several different ways, but you are always prompted for credentials. The customer
tells you that the person who created the passwords is no longer employed by the company. What can
you do to access the switch?
A. Use the failsafe credentials, admin for username and password for password.
B. Press the Reset and Clear buttons on the switch's front panel, holding them for at least 5 seconds, to
clear the password
C. Access the Boot ROM menu and bypass the configuration, starting the switch at factory default
settings.
D. Access the switch over a direct console connection, which always permits access without a password.
Answer: C

HP   HP2-Z12   HP2-Z12   HP2-Z12 exam simulations

NO.15 You are troubleshooting a connection on an HP A Series switch that has one LED per-port. You want to
know if the port is operating in the wrong duplex mode. How do you use the LED to obtain relevant
information?
A. Click the Mode button until the mode LED is blinkinggreenand thencheck the port LED.
B. Click the Mode button until the mode LED is yellow and thencheck the port LED.
C. Check if the port LED is blinking,which indicates its duplex status (while its color indicates speed).
D. Check the color of the port LED, which indicates its duplex status (while its blinking indicates speed).
Answer: B

HP test answers   HP2-Z12 test questions   HP2-Z12 study guide   HP2-Z12 certification training

NO.16 You are servicing an HP A Series switch, which is currently using a file call myconfig.cfg for the
startup-config. You want to preserve your new configuration changes in the switch's startup config.
Which command should you use?
A. write memory
B. save
C. save startup.cfg
D. copy running-config startup-config
Answer: D

HP original questions   HP2-Z12   HP2-Z12

NO.17 The exhibit shows the Power and seven-segment LEDs of an HP A Series switch. What is the switch's
status?
Exhibit:
A. The switch has member ID 8 in the cluster.
B. The switch has member ID 8 in the cluster, but its attempt to join the cluster has failed.
C. The switch has failed the power on self test (POST) with ID 8.
D. Port number 8 has failed the switch's power on self test (POST).
Answer: C

HP exam dumps   HP2-Z12 demo   HP2-Z12 test   HP2-Z12

NO.18 How can you check the status of the ports that are providing Power over Ethernet (PoE) on an HP
E2610-PWR switch?
A. Use the Mode button to selectPoE and then view the port Link and Mode LEDs
B. Use the Port Locator button to selectPoE and then view the port Status and Link LEDs.
C. View the portPoE LED.
D. Use the switch'sPoE LED and the PoE LED for each port.
Answer: A

HP   HP2-Z12 certification   HP2-Z12 practice test   HP2-Z12 test answers

NO.19 Which E Series switches require two power supplies to be completely operational? (Select two.)
A. HP E4200vl switch
B. HP E5406zl switch
C. HP E5412zl switch
D. HP E2900 al switch
E. HP E8212zl switch
Answer: C,E

HP   HP2-Z12   HP2-Z12   HP2-Z12   HP2-Z12 test

NO.20 Which area of the network is considered the backbone?
A. data center
B. core
C. distribution layer
D. LAN access layer
Answer: B

HP   HP2-Z12   HP2-Z12 pdf   HP2-Z12 answers real questions   HP2-Z12 test

If you are interested in IT-Tests's training program about HP certification HP2-Z12 exam, you can first on WWW.IT-Tests.COM to free download part of the exercises and answers about HP certification HP2-Z12 exam as a free try. We will provide one year free update service for those customers who choose IT-Tests's products.